The unique design of the Mini Gel Tank allows you to run mini gels quickly, easily, and leak-free without any clamps or grease. The set-up time is only 30 seconds; just drop the cassette clamps into the electrophoresis tank, insert the gels, and pull the cassette clamp forward. The perfect no-leak seal results in no mess and consistent performance.
Suitable for a wide range of pre-cast gels (Novex®, NuPAGE®, Bolt® Bis-Tris).
- Suitable for either self-cast gels or pre-cast gels.
- Can run 2 mini gel at the same time to increase working efficiency.
- The design of the electrophoresis tank consists of 2 small chambers with a capacity of 400 mL each, saving 50% of buffer solution when running a mini gel.
- The design of the electrophoresis tanks is a transparent plastic layer and has a white back surface, making it easy to load the sample and observe during the process.
- The conditions are optimized, using a constant voltage allowing the Bolt® Bis-Tris Plus gel to run for approximately 35 minutes.
- The runtime varies depending on the buffering conditions and the power used.
Feature |
|
Capacity |
Up to 2 gels per run |
Dimensions |
11 x 12 x 16 cm |
Buffer Chamber Capacity |
400 ml |
Material |
Acrylic |
Electrode Wire |
Platinum (0.010”diameter) |
Electrical Limits |
500VDC or 100W |
Operating Temperature |
15 - 30℃ |
Temperature Limit |
40℃ |
Gel Compatibilit |
Bolt® Bis-Tris Plus Gels, Novex® trisglycine, NUPAGE® Bis-Tris Mini Gels |
Products |
Catalog number |
Welcome Packs |
|
Mini Gel Tank and Blot Module Set |
NW2000 |
Mini Gel Tank |
A25977 |
Bolt™ Welcome Pack A (4-12%, 10-well) |
NW0412A |
Bolt™ Welcome Pack B (4-12%, 15-well) |
NW0412B |
Bolt™ Welcome Pack + iBlot™ 2 System |
NW0412AIB2 |
Mini Gel Tank System |
|
Mini Gel Tank Lid |
A25944 |
Mini Gel Tank Base |
A25950 |
Gel Runner Tank |
B4478641 |
Cassette Clamp, right |
A25945 |
Cassette Clamp, left |
A25946 |
Cassette Clamp Cam Handle Set |
A26732 |
Novex® Power Supply Adapters |
ZA10001 |
Gel Knife |
EI9010 |