Hệ thống lọc tiếp tuyến Cogent M1

Cogent® M1 TMP Control Tangential Flow Filtration System

Hệ thống lọc tiếp tuyến Cogent® M1 TMP là một hệ thống TFF để bàn với tính năng điều khiển TMP tự động phù hợp cho các nghiên cứu phát triển quy trình và mở rộng quy mô, cũng như các thử nghiệm lâm sàng và sản xuất quy mô nhỏ 

  • Cogent® M1 kết hợp các tính năng thiết kế sáng tạo và thông minh không chỉ nâng cao hiệu suất mà còn cho phép giảm lượng lưu giữ cực thấp để đạt hệ số cô đặc tối đa và tối ưu hóa độ thu hồi
  • Được trang bị bình chứa 10 lít với cân tích hợp, hệ thống Cogent® M1 có thể vận hành ở chế độ lọc theo mẻ fed-batch hoặc DF cách sử dụng bơm tùy chọn, cho phép hệ thống xử lý lên đến 100 lít hoặc hơn dựa trên đặc tính của sản phẩm và màng lọc.
  • Ngoài ra, giá đỡ màng lọc độc quyền được thiết kế với các cảm biến tích hợp và các kết nối vệ sinh, góp phần đáng kể vào việc giảm lượng mẫu làm việc tối thiểu. Tùy theo đặc tính dòng chảy, hệ thống có thể chạy tối đa 5 màng Pellicon® 2 mini (0,1 m2) hoặc tối đa 5 màng Pellicon® 3 0,11 m2. Các màng lọc này hỗ trợ diện tích màng từ 0,1 m2 đến vài m2 với giá đỡ Labscale ™ tùy chọn.
  • Giảm tối thiểu lượng mẫu bám giữ để thu hồi sản phẩm tối đa
  • Nâng cao năng suất
  • Dễ sử dụng
  • Có thể xử lý lên đến 100 lít hoặc hơn
  • Kiểm soát TMP tự động

 

Số lượng màng lọc TFF có thể ghép nối:

Pellicon® 2 cassettes 0.1 m2: 5 (0.1 m2 to 0.5 m2)

Pellicon® 2 cassettes 0.5 m2: 2 (0.5 m2 to 1.0 m2)

Pellicon® 3 cassettes 0.11 m2: 4 (0.11 m2 to 0.44 m2)

Pellicon® 3 cassettes 0.57 m2: 2 (0.57 m2 to 1.14 m2)

Số lượng Pellicon® Cassette Holder kèm với hệ thống ghép nối:

Tối đa 4 Pellicon® 3 cassettes diện tích 0.11 m2

Tối đa 5 Pellicon® 2 cassettes diện tích 0.1 m2

Diện tích màng lọc: 0.1…1.14 m2

Thể tích làm việc tối thiểu: 300 mL ở tốc độ bơm 20%

Thể tích khởi động: tank 10 L

Thể tích hold-up: <10 mL

Khoảng nhiệt độ: 4oC…50oC

Tốc độ dòng chảy tối đa: 4.5 L/phút ở 5 bar g (72.5 psi)

Tốc độ dòng chảy tối thiểu: 200 mL/phút

Áp suất vận hành tối đa: 5 bar g

Áp suất hệ thống tối đa: 6 bar g

Kích thước: 76.8 x 51.2 x 114.7 cm

Khối lượng: 78 kg

CM06100

Cogent® M1 system, 100 – 120VAC, 50 HZ, 60 HZ

CM06230

Cogent® M1 system, 230VAC, 50 HZ

Compressed air purity analyzer S600

Compressed air purity analyzer S600

- All-in-one device measures Particle concentration, dew point and oil vapor
- Measures additionally the temperature and pressure
- Software guided measurement makes it easy to generate reliable results
- Report generator creates PDFs for audits
- Ultra portable and compact design
- Compressed air connection via 6 mm tube
- Integrated data logger saves data for later analysis
- Dew point measurement from -100... +20 °C Td
- Oil vapor measurement from 0.003... 10.000 mg/m³
- Particle measurement from 0.1 < d ≤ 5.0 µm
 

Dew point sensor with display and alarm S201

Dew point sensor with display and alarm S201

- Dew point sensor for low dew point applications down to -60°C Td
- Long term stability
- Graphic display
- Relay output for alarms
- IP65 casing provides robust protection in rough industrial environment
- Fast response time ensures safe and reliable indication whenever dew points are out of valid ranges
- Can be installed directly into dryers through G ½” thread
- High accuracy of ±2°C dew point
 
Portable dew point metter

Portable dew point metter

- Measures dew point, temperature and pressure (all in one instrument)
- 3 sensor solutions available:

Q: -100 ... -30°C Td sensor for trace moisture applications

P: -50 ... +50°C Td sensor for standard applications 

Q+P : covering the full range of dew point measurement
- Modern color touch screen interface
- Data logger, USB interface, wireless connection to portable printer
- Measuring / parking chamber for fast sensor response
- Application software included

Oil vapor sensor S120

Oil vapor sensor S120

- Can be used for permanent or in portable applications
- Measures down to 0.003 mg/m³
- Easy connection through sampling hose and quick connect
- Output signals: - 4 ... 20 mA
   + RS-485, Modbus/RTU
   +  Relay switch (NO)
- PID sensor for highest accuracy
- Service and Alarm indication through LED
- Connectable to SUTO displays and data loggers as well as third parties displays and control units
- Integrated 5” touch screen and data logger (option)
 

Leak Detector for Pneumatic system

Leak Detector for Pneumatic system

S530 is a LEAK DETECTOR FOR PNEUMATIC SYSTEM. When gases are leaking through tubes and tanks, an ultrasonic sound is produced which can be detected by the S530 even from several meters away.
Integritest® 5 - Integrity Test Instrument

Integritest® 5 - Integrity Test Instrument

The Integritest® 5 is an easy-to-use, portable, and fully-automated instrument that verifies the integrity of filters or processing equipment.

Authorized distributor