Millipore Express® SHC Hydrophilic Filter (PES membrane)
Millipore Express® SHC Cartridge Filter 10 in. 0.5/0.2 µm Code 7 Silicone
Millipore Express® SHC (Sterile, High Capacity) filters provide superior throughput and capacity in applications where sterilizing-grade performance is needed and premature filter plugging is a concern. These filters are ideal for sterile filtration of cell culture media, protein solutions and other high fouling fluids. Millipore Express® SHC filters contain two polyethersulfone membrane layers, 0.5 μm/0.2 μm, and come in a range of device formats and sizes to suit your application needs.
Benefits
- High capacity, high flux hydrophilic PES membranes
- Validated sterilizing-grade performance
- Easy wetting and integrity testing
- Superior throughput in high fouling streams, including media and protein containing solutions
- Increased capacity for improved process efficiency and economy
- Broad chemical compatibility across a wide pH range (1-14) — caustic compatible
Filter formats
Millipore Express® SHC filters are offered in a range of filter formats and capsule sizes, and allow easy scale-up of your small volume filtration steps to larger, full-scale
filtration processes:
- OptiScale® small-scale disposable capsule filters
- Opticap® XL 150/300/600 small-scale disposable capsule filters with optional filling bell— gamma compatible or presterilized
- Opticap® XL disposable capsule filters— autoclavable, gamma compatible, or presterilized
- Opticap® XLT disposable capsule filters— autoclavable, gamma compatible, or presterilized. Gamma compatible XLT capsules are also available in high area formats.
- Standard and high area cartridge filters
- Media additives
- Column protection
- Concentrated protein streams
- Cell harvest (post clarification)
- Caustics/pH adjusters
- Buffers
- CIP solutions
| Materials of Construction | |||
| Filter membrane: | Hydrophilic polyethersulfone | ||
| Film edge: | Polypropylene | ||
| Supports: | Polypropylene | ||
| Cage and end caps: | Polypropylene | ||
| Core: | Polysulfone | ||
| O-rings: | Silicone, EPDM or fluoroelastomer | ||
| Maximum Differential Pressure | |||
| Forward: | 6900 mbar (100 psi) at 25 °C 1700 mbar (25 psi) at 80 °C 1000 mbar (15 psi) at 135 °C* |
6900 mbar (100 psi) at 25 °C 1700 mbar (25 psi) at 80 °C 340 mbar (5 psi) at 135 °C |
|
| Reverse: | 2100 mbar (30 psi) at 25 °C 69 mbar (1 psi) at 135 °C* |
2100 mbar (30 psi) at 25 °C 69 mbar (1 psi) at 135 °C |
|
| Bubble Point at 23 °C | ≥ 4000 mbar (58 psi) air with water | ||
| Air Diffusion at 23 °C | Through a water wet membrane at 2.8 mbar (40 psi): | ||
| ≤13.3 cc/min. | ≤ 28.2 cc/min. | <56.4 cc/min. | |
Standard Area Cartridges with Silicone O-rings Code 7, 2-226 O-ring w/locking-tabs and spear
| Catalogue Number | Pore Size | Cartridge Nominal Lengthicon | |
|---|---|---|---|
| CHGE71TS3 | 0.5 / 0.2 µm | 10 in. (25 cm) | |
| CHGE72TS3 | 0.5 / 0.2 µm | 20 in. (50 cm) | |
| CHGE73TS3 | 0.5 / 0.2 µm | 30 in. (75 cm) | |
| CHGE75TS3 | 0.5 / 0.2 µm | 5 in. (12.5 cm) |
STEAM-THRU® SERIES CONNECTOR - Steam-through II
Steam-Thru Connections allow a quick and easy sterile connection between stainless steel biopharmaceutical processing equipment and disposable bag and tube assemblies. The single-use design saves time and money by eliminating unnecessary cleaning procedures and reducing validation burden associated with reusable components
STEAM-THRU® SERIES CONNECTOR - Steam-through I
Steam-Thru Connections allow a quick and easy sterile connection between stainless steel biopharmaceutical processing equipment and disposable bag and tube assemblies. The single-use design saves time and money by eliminating unnecessary cleaning procedures and reducing validation burden associated with reusable components
ASEPTIQUIK® S SERIES CONNECTORS
AseptiQuik® S Small Format Connectors provide quick and easy sterile connections for small-flow applications, even in non-sterile environments. The "FLIP-CLICK-PULL" design of AseptiQuik S enables users to easily transfer small volumes of media with less risk of operator error. The connector’s genderless and robust design provides reliable performance without the need for clamps, fixtures or tube welders. Biopharmaceutical manufacturers can now make 1/8”, 1/4” and 3/8”hose barb and 1/4” and 3/4” sanitary sterile connections with the quality and market availability they expect from the leader in single-use connection technology.
HFC39 SERIES CONNECTOR - Coupling Bodies
HFC39 Series sterile disconnect couplings prevent external organisms from entering into the media flow path upon disconnection. Automatic shutoff valves close off the flow path aseptically protecting valuable media while also eliminating the need for pinch clamps and tube welders. The easy-to-use thumb latch design provides a secure, leak-free connection and enables one-hand disconnects
Corporate tax code: 0106092106 issued by Hanoi City Department of Planning and Investment on January 22, 2013.