The Thermo Scientific™ HyPerforma™ DS 300 Single-Use Mixer (S.U.M.) is built upon the proven legacy design of the S.U.M; but optimized for lower-cost, high throughput applications. The smaller footprint and lighter weight of the HyPerforma S.U.M. DS 300 provide mobility and flexibility in mixing applications not currently available in the market.
1. Motor assembly
2. Horizontal support arm
3. Height indicator and cable management housing
4. Vertical lift
5. Handheld control device
6. Electrical box
7. Main disconnect switch
8. E-stop reset button
9. Drive shaft (stored)
10. Mounted drive shaft, sleeve, and impeller
11. Plastic drum
12. Liquid drain port
13. Conical insert
14. Dolly
15. Adjustable handle (in stored position)
16. Reusable bearing hub (open-top applications only)
17. Square torque wrench
18. Spanner wrench
19. Drum positioner (optional)
20. Locking rear casters
HyPerforma S.U.M. DS 300 |
||||
Electrical power supply requirement |
108–240 VAC; 50–60 Hz; single phase |
|||
Input amperage |
15 amps |
|||
Footprint (D x H) |
86.4 cm (34.0 in.) x 76.2 cm (30.0 in.) |
|||
Height |
122.4 cm (48.19 in.) low; 162.4 cm (63.93 in.) high |
|||
Weight |
180 kg (398 lbs) |
|||
Control box |
Built to IP65 standards |
|||
Lift range |
40 cm (15.7 in.) |
|||
Flow type |
Radial/axial |
|||
Mixing rate |
30–350 RPM |
|||
Impeller to BioProcess Container location |
5:1 off center |
|||
Impeller (quantity x blade count) |
1 x 3 |
|||
Counterclockwise mixing-flow direction |
Down-pumping |
|||
Mixing Containers |
||||
|
50 L |
100 L |
200 L |
300 L |
Turndown ratio |
5:1 |
4:1 |
||
Footprint (D x H) (cm) |
59.7 x 58 |
59.7 x 75.57 |
59.7 x 113.7 |
61 x 122 |
Hardware material |
Plastic (LLDPE) |
|||
Impeller sleeve |
||||
Impeller material |
USP Class VI, HDPE |
|||
Impeller sleeve with Quick Connect |
C-Flex™ tubing |
Tên sản phẩm |
Cat. No. |
HyPerforma S.U.M. DS 300 |
|
DS 300 unit; 108–240 VAC, 50 to 60 Hz |
SUMDS0300.9000 |
DS 300 unit; 108–240 VAC, 50 to 60 Hz with drum positioner |
SUMDS0300.9001 |
DS 300 unit; 108–240 VAC, 50 to 60 Hz with adjustable motor head |
SUMDS0300.9002 |
DS 300 unit; 108–240 VAC, 50 to 60 Hz with adjustable motor head |
SUMDS0300.9003 |
Drums and drum dollies |
|
Tank liners |
|
BioProcess Containers |
|
Impeller sleeves |
|
Reusable hub |