Sample Mixing System HyPerforma™ Mixtainer™
HyPerforma™ Mixtainer™ System
The Mixtainer is a convenient-to-use closed system for mixing, storing, and dispensing sterile liquids. The mixing feature is effective and nonfoaming. It ensures homogenous contents and uniformity over long dispense periods. A dolly with casters allows the Mixtainer to roll over smooth surfaces between fill and dispense stations.
The Thermo Scientific single-use flexible BioProcess Container (BPC) lines the drum of the Mixtainer. This gamma-sterilized BPC eliminates the need for on-site cleaning and sterilizing. Replace the BPC prior to each fill to ensure a clean, sterile, and validated container. When needed, use water and ordinary detergents to clean other Mixtainer surfaces.
A Teflon-coated stir-bar, integrated into every Mixtainer BPC, is driven by a magnetic stirrer located on the dolly under the drum. All Mixtainer BPCs also include four ports, which can be used for filling, dispensing, sampling, and liquid additions. Because the BPC is discarded after each use, there is no risk of cross-contamination. All fluid-contact surfaces are completely fresh, clean, and sterile with every use.
The system is available in 50, 100, and 200L unit volumes and is recommended for applications where the BPC contents are post filtered.
The Mixtainer system has numerous applications. It can be used in current good manufacturing practices and laboratory facilities to mix, store, and dispense:
• Media, sera, and reagents
• Buffer solutions
• Process fluids
• Bulk and new product
• Microcarrier mixtures
• Powdered media with water
| Products Name |
Cat. No. |
|
HyPerforma Mixtainer BPC |
|
|
50 L Mixtainer BPC, 4 ports, top dispense, powder/liquid mixing |
SH30687.04 |
|
100 L Mixtainer BPC, 4 ports, top dispense, powder/liquid mixing |
SH30687.05 |
|
200 L Mixtainer BPC, 4 ports, top dispense, powder/liquid mixing |
SH30687.06 |
|
Conical drum and accessories |
|
|
50 L conical drum, top dispense, with clamps |
SV50517.11 |
|
100 L conical drum, top dispense, with clamps |
SV50517.12 |
|
200 L conical drum, top dispense, with clamps |
SV50517.13 |
|
Stainless steel dolly (50, 100, and 200 L) |
SV50109.01 |
|
Stainless steel support (EU) |
SV30097.03 |
|
Stainless steel support (US) |
SV30097.04 |
|
Magnetic stirring plate (EU) |
SV30097.01 |
|
Magnetic stirring plate (US) |
SV30097.02 |
Compressed air purity analyzer S600
- All-in-one device measures Particle concentration, dew point and oil vapor
- Measures additionally the temperature and pressure
- Software guided measurement makes it easy to generate reliable results
- Report generator creates PDFs for audits
- Ultra portable and compact design
- Compressed air connection via 6 mm tube
- Integrated data logger saves data for later analysis
- Dew point measurement from -100... +20 °C Td
- Oil vapor measurement from 0.003... 10.000 mg/m³
- Particle measurement from 0.1 < d ≤ 5.0 µm
Dew point sensor with display and alarm S201
- Long term stability
- Graphic display
- Relay output for alarms
- IP65 casing provides robust protection in rough industrial environment
- Fast response time ensures safe and reliable indication whenever dew points are out of valid ranges
- Can be installed directly into dryers through G ½” thread
- High accuracy of ±2°C dew point
Portable dew point metter
- Measures dew point, temperature and pressure (all in one instrument)
- 3 sensor solutions available:
Q: -100 ... -30°C Td sensor for trace moisture applications
P: -50 ... +50°C Td sensor for standard applications
Q+P : covering the full range of dew point measurement
- Modern color touch screen interface
- Data logger, USB interface, wireless connection to portable printer
- Measuring / parking chamber for fast sensor response
- Application software included
Oil vapor sensor S120
- Can be used for permanent or in portable applications
- Measures down to 0.003 mg/m³
- Easy connection through sampling hose and quick connect
- Output signals: - 4 ... 20 mA
+ RS-485, Modbus/RTU
+ Relay switch (NO)
- PID sensor for highest accuracy
- Service and Alarm indication through LED
- Connectable to SUTO displays and data loggers as well as third parties displays and control units
- Integrated 5” touch screen and data logger (option)
Leak Detector for Pneumatic system
Integritest® 5 - Integrity Test Instrument
The Integritest® 5 is an easy-to-use, portable, and fully-automated instrument that verifies the integrity of filters or processing equipment.
Corporate tax code: 0106092106 issued by Hanoi City Department of Planning and Investment on January 22, 2013.