Magnets for Molecular and Cell Separation Applications

 DynaMag-2

10 µL–2,000 µL

• Holds 16 (1.5–2 mL) microfuge tubes
• 8 positions on each side of the rack
• Top rack can be quickly removed from the magnet in the base, ready for vortexing, rotation or manual sample shaking. A center pin in the rack ensures uniform vortexing of all tubes.
• Excellent control and visibility of your isolations

• The removable tube-holder plastic rack for the DynaMag-2 is also available as a separate item
• An additional SampleRack minimizes the need to move tubes between racks
• The SampleRack can be placed on the bench, in the fridge, or in the incubator

DynaMag-Spin

10 µL–1,500 µL

• Holds 6 (1.5 mL) microfuge tubes
• Circular top rack can be quickly removed from the magnet in the base, ready for vortexing or manual sample shaking
• Good control of your isolations

DynaMag-5

1 mL–5 mL

• Flexible magnet: Handles many different tube sizes (11–16 mm in diameter, e.g. flow tubes and blood collection tubes) in a more functional way
• More samples: Accommodates up to 8 tubes with sample volume from 1 to 5 ml
• Removable SampleRack: The tubes can be kept in the same position during the entire isolation process and beyond, just lift the whole SampleRack on/off the magnet base during handling. Buy an extra SampleRack and double the capacity

SampleRack for DynaMag-5

• The removable tube-holder plastic rack for the DynaMag-5 is also available as a separate item
• Additional SampleRacks may be useful when there are multiple users of the DynaMag-5 magnet or when processing more than 8 samples at a time
• The SampleRack can be placed on the bench, in the fridge, or in the incubator

• Holds 4 standard 15 mL tubes
• Can be used for any starting sample in combination with all types of Dynabeads
• Good control and visibility of your isolations
• We recommend DynaMag-5 for FACS tubes or blood collection tubes

(This magnet replaces the Dynal MPC-50 magnet)

• Holds 2 x 50 mL tubes
• Can be used for any starting sample in combination with all types of Dynabeads
• Good control and visibility of your isolations

DynaMag-96 Side


       (magnified below)

• Holds PCR-Style Strips & Plates:
  • PCR strips (8 & 12 well)
  • non-skirted 96-well plates
  • ½-skirted (200 µL) 96-well plates
  • 48 & 96 microtubes for the Applied Biosystems GeneAmp PCR System
• Pulls beads to the side of each well
• For manual & automated workflows
• Footprint same as a 96-well plate
• Features 13 columns
• In conjunction with an automated platform, the 13th column enables sample mixing without physically interacting with the sample.This is performed by repeatedly shifting the plate from the left-most to the right-most position & vice-versa.

 DynaMag-96 Bottom


       (magnified below)

• Holds PCR-Style Strips & Plates:
  • PCR strips (8 & 12 well)
  • non-skirted 96-well plates
  • ½-skirted (200 µL) 96-well plates
  • 48 & 96 microtubes for the Applied Biosystems GeneAmp PCR System
• Pulls beads to the bottom of each well
• For manual & automated workflows
• Footprint same as a 96-well plate

 DynaMag-96 Side Skirted

       (magnified below)

• Holds skirted 96-well PCR-Style plates.
• Pulls beads to the side of each well.
• For automated workflow.
• Footprint size same as a 96-well plate.

• 96-well round bottom plates
• 96-well flat bottom plates
• 24-well plates
• 12-well plates
• 6-well plates
• not recommended for use with 48-well plates

 DynaMag CTS

• For closed sterile blood bags
• Scalable volumes: 50 mL to 330 mL in static separations. 
• >10 L in continuous flow separations following T cell expansion protocols.

• Intended to be used with the Dynabeads CTS product portfolio in clinical research.

• Positively isolate bead-bound cells e.g. for subsequent stimulation/ expansion of T cells with Dynabeads CD3/CD28 CTS, and for removal of the beads following the expansion protocol.